 |
Concord Portable Handheld Pulse Oximeter with Loud Audible Alarms and Large Color Display
The Concord Handheld Pulse Oximeter is a compact, lightweight, and durable handheld pulse oximeter. The handheld pulse oximeter can be used for spot-checking or for long term continuous monitoring. The Concord handheld pulse oximeter comes with optional sensors that accommodate infants, children and adults. Choice of ear clip sensor, adult, infant or pediatric soft sensor. The soft sensor allows for maximum comfort while on the user's finger, while still providing accurate readings. Ear clip sensors have the ability to measure oxygen saturation and heart rate from the ear lobe. The Concord handheld pulse oximeter is an affordable, convenient, and durable tool for monitoring pulse rate and blood oxygen. Along with PR and SpO2, the unit also displays Perfusion Index as well as SQI, which indicates the signal strength.
The Concord handheld pulse oximeter features programmable alarms for both high and low pulse rate and blood oxygen levels. Alarms include visual and audible indicators. If either SpO2 or PR go outside of the set parameters, the device's alarm will go off.
Features:
ACCURATE & RELIABLE: Large OLED color display accurately measures SpO2 and Pulse Rate measurements during motion and low perfusion
EASY AND EFFICIENT: Excellent for quick spot-checks and continuous monitoring. SpO2 measurement range: 0%-100%; Pulse-rate measurement range: 25-300bpm
BATTERY LIFE: A new set of batteries will provide about 22 hours of
operation
ALARMS: Adjustable Audible and visual alarms for both SpO2 (88% to 100%) and Pulse Rate (30bpm to 250bpm). Low signal-quality and battery indicators
VERSATILE: Sensors available for Infants, Children and Adults and those needing an ear clip sensor
DEPENDABLE: USA Based Tech Support. 2-Year Warranty
In The Box:
* Special Note: The ear clip sensor has been replaced by the multisite sensor as it functions as an ear clip sensor.
Need Help?
How to remove the Protective Rubber Cover video: Click here
- PLEASE READ THIS Important Information about using with a Multi-site/Ear-Clip Sensor
In order to get your Mullit-site/Ear clip sensor to work, you need to find a spot on your ear where the light passes through and the blood flow is adequate enough to get a reading. This often may not be the ear lobe. If you apply the sensor in a slightly darkened room, you will see a red light on one side where the sensor touches the skin. This is the emitter and the other side is the receiver. The light will be blinking until it is situated properly and then, the light will be solid red. You may have to try numerous locations on the ear to find the best spot. It may take up to a minute for your oximeter to get a reading. You may also find that the senor works on other spots such as the thin skin between the fingers.
  
|
|
|
Good and accurate 
It Works As Advertised